2007 Tartan 3400

Accommodations

 Forward cabin with storage lockers, hanging locker and dovetail drawers.   Approximately 78” x 60” forward berth.  Furniture grade main cabin settees and seats with contoured cushions.  Cushion fabric is Viola Beige.  Cherry cabinets with ventilated raised panel doors throughout main salon.  Storage outboard of main cabin seat backs.Full navigation station.  Navigation lockers with installation space for extensive electronics.  Aft cabin with a double berth, hanging locker and shelves.  Storage below berths.  Cockpit seat locker.  Cockpit lazarette hatch to starboard.  Propane gas bottle storage in cockpit for two 11 lb. (5kg.) tanks

Galley

-  2 burner Force 10 gimbaled LPG stove with oven and broiler.   LPG sniffer with automatic shut off.   Cherry faced cabinetry with raised panel access doors.  Cherry faced, dovetailed cutlery drawers.  9” deep molded Vanilla Granicoat single sink with marine grade galley faucet and manual foot pump with swivel spigot.  Vanilla Granicoat solid surface galley countertops.  Storage under galley sink through ventilated raised panel cherry doors.  Molded icebox with Granicoat solid surface counter top and 4” foam insulation, insulated front and top load access.   Hot and cold pressure water with service access to pump and plumbing.  Polyethylene tubing and Whale mechanical fittings for freshwater plumbing.  All below waterline hose connections are double clamped with stainless steel hose clamps.  Premium marine grade hoses used throughout.  60 gallons (227.1 liters) of freshwater tankage with distribution manifold.  6 gallon (22.7 l) water heater, operates on 110 VAC or engine heat exchanger.

Electronics

Raymarine ST60 Tridata speed, depth, log, timer and temp.  Raymarine ST60 Wind.  Garmin GPSMAP 2010C GPS chartplotter fully integrated with SeaCas AIS overlay and Icom 602 DSC VHF.  Hailer/listener/foghorn.  Radar reflector.

Electrical

• Batteries, (3) Group 27  12 VDC.  Heart Freedom 10 inverter.  Polished chrome and stainless steel interior lighting.  Service lighting in engine compartment and cockpit lockers.  Directional reading lights at berths and main cabin settees.  Directional spot lights in galley and over main cabin table.  Cockpit and swim ladder courtesy lighting.  110 VAC distribution panel.  110 VAC outlets in each cabin with GFI protection.  30A, 50 foot shore power cord.  12 VDC metered distribution panel.  Battery selector switch.  Electrical bonding system.  Electric sump pump with automatic float switch for icebox and shower drains.  Electric bilge pump with automatic float switch with manual override.  UL approved, stranded, tinned copper wiring.  Wiring bundled in PVC conduit with room for future installations.  All wiring chafe protected where it passes through internal structure.  ABYC compliant color coded wiring throughout.  USCG approved navigation lights on bow rail, stern rail and mast.  Two Solar panels installed on deck centerline.  12 VDC outlets at helm and nav station.

Spars and Rigging

Mast: Autoclave cured, prepreg carbon-fiber mast.  Finished with white acrylic urethane topcoat.  Tapered mast section for reduced weight aloft.  Tapered airfoil swept spreaders.  Custom carbon fiber masthead with sheaves for (1) jib, (1) main, (1) reacher and (1) spinnaker halyard.  Carbon fiber backstay crane integrally molded at lamination.  Mainsail halyard winch on mast with rope clutch.  1 x 19 Stainless steel wire rigging with forged turnbuckles.  Internal halyards.  Harken furler for self-tacking jib.  Mast to deck tie-rod to carry running rigging loads.  Masthead anchor light.  Custom stainless steel chainplate system ties structural FRP grid and hull.  Steaming light with foredeck illuminator.  Mast wiring conduit.  Masthead VHF antenna.  Spartite mast sealing and chock system.  Split backstay with integral adjuster. Boom: Novis carbon-fiber boom with oval section.  (2) Single line reefs led aft to housetop winch.  Internal 4:1 outhaul.  Two-part boom topping lift.  Rod vang with tackle led aft.

Deck

NPG Isophthalic gelcoat.  Infused BPA modified epoxy deck.  CNC computer cut sealed end grain balsa coring.  Locally reinforced at high load areas.  Molded nonskid surface on working areas.  All deck penetrations made into solid fiberglass “core windows”.   6061 T6 aluminum backing plates added at lamination for all loaded hardware.  Inward facing hull flange with integrally molded 6061 T6 aluminum bar forming a full length backing plate for hull to deck joint.  Hull to deck joint fasteners, stainless steel to meet or exceed ABS standard for offshore use.  Hull to deck joint bonded with 3M 5200 adhesive sealant.  35 lb. CQR anchor and rode.  Bruce Anchor and 150 ft. rode.  SS Dorade Guards.  Throwable life ring. Four full sized fenders with Tartan logo covers. 

Sails and Canvas

Fully battened mainsail in lazy jacks.  Self tacking jib on Harken roller furler.  Cruising spinnaker in sock.  Dodger.  Zip on rain/sun fly.  closed cell foam cockpit cushions with navy blue sunbrella covers.  Fitted winter cover.

Disclaimer
The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.